|
Select From Products Below by Clicking
on the link
Free File Conversion Utilities Click Here
Do you have an Older Programmer you want to trade? Call us for
our generous Trade program.
You can't afford to buy a new programmer? Call us , we have a
large selection of refurbished models for a fraction of the cost!
Do you have old obsolete devices you cannot find a programmer
for? Try us! we even support chips dating back to 1977 such as the Intersil
IM6655 or IM6654 and TI TMS2708 , Etc. Waferscale PSD, Raytheon and Harris
PROMs, etc. etc.
Did you know that Logical Pioneered the field of Universal Device
programmers by introducing the first DAC-PER-PIN programmer in 1984, The Allpro
Universal Programmer?
Do you need advice on how to select a programmer? Well call us ,
since we have done it for 27 years! If we can't help you , we will
recommend a competitor!
Did you know Logical owned the most popular PLD design language
CUPL for many years and later sold the product line to Protel Internaltional
Can you get cash for your old Logical Programmer? Yes you can ,
before you auction it on Ebay, give us a call!
How Do you send a unit in for Repair.
Simply Call 303-861-8200 get, an RMA number and ship it to our
factory address in Denver at 1521 Marion St. Denver, Co, 80218
What is the fastest way to place and order? You can fax us the
order to 303 -813-9019 and call us with your credit card number
Logical acquired several companies over the years, including
Digelec , Stag USA and a fewer small programming companies. Also Logical
provides direct replacement for the now defunct Bytek programmers co. and Valley
Date sciences. Logical provides direct replacement for various Digelec and Stag
Microsystem gang programmers.
NEEDHAMS COUNTER
| |
|
Gangpro-16xp Stand-Alone or PC based Copier
Windows or Command Line Software
Expandable
to 32 Sockets 32/48 Pin
 |
Gang EPROMs,
Microcontrollers, Serial EEPROMs, Flash Memory Chips Directly From you
Master Chip or From PC file. This is an ideal Production or Shop programmer
with very easy to use software. Control it from your own GUI or
integrated with your Labview software!
|
- Windows 98/2k/NT/XP
Compatible/ Command Line Window Software
- Easy User
Interface for non-technical Persons
- Serialization
Software, Go-No-go software buttons, Macros!!
- Editor , Set
Config bits for Micros, Auto Detect Devices.
- Choice Socket
Platters , No individual Socket Converters Needed!!!
- Expansion Chassis Allows Up
to 3 Additional Platters of 9 Sockets!!
- Serial Port Interface, USB
port coming soon ( Free Upgrade) .
- Full Return Policy, 7 Day
Free Trial
- Backed by Logical's, 25
Year Customer Commitment Program
|
|
GANG 32 OF THE SAME OR COMBO GANG OF
4 DIFFERENT PLATTERS OF 8 CHIPS
- 16/32 Sockets
Programmed Independently in 4 eight socket banks
- Each Bank of 8 Can be
configured with a different socket platters
- Each Bank of 8 has own
Master socket allowing set programming
- 100% Designed ,
Manufactured and Supported in Denver, Colorado, USA.
|
|
|
|
Gangpro-16xp is the ideal
unit for duplication and creation of programmable memory devices. The unit
can be operated without a PC from a master chip for duplications, or can be
connected to the PC via Winlink software included in the unit for creation
of devices from a file or edit buffer. Data can also be read from a device
and uploaded to the PC to be saved for later use. It can program 8
simultaneous devices from the PC or the Master socket. The unit can come
with any socket configuration desired and configured later for different
types of socket through various programming socket platters. This will avoid
the use of individual adaptors and be more cost effective.
Finally one unit that can replace all previous
models of Logical Programmers at affordable cost. Place your orders now as
quantities are limited for our first run production. This unit can replace
the following previous programmers without the loss of functionality.
See list below
|
|
Features |
|
The Gangpro-16xp is loaded with features not found in comparably priced gang programmers. The unique control
interface allows inexperienced personnel to quickly produce programmed parts. Up to 30 part selections and command sequences can be stored in the internal memory and activated by a
single button. Operation status such as PASS/FAIL
is displayed by tri-color LEDs for reach ZIF socket. Part selection, device
option settings and desired commands are arranged in a convenient job format in the internal memory. Jobs can be added
from the front panel or from a PC using the WinLink Job Setup Wizard. The
wizard steps you through the process of setting all parameters necessary to complete the job. Once the job is created, the operator can execute
it by pressing a single button on the front panel
or pressing and optional remote switch that plugs
into the back of the unit. The proprietary
SMART-PART feature assures programming compatibility when mixing different
manufacturer parts and notifies the user when
parts are inserted incorrectly or the parts are not program compatible .
The Gangpro-16xp supports virtually all 24/28/32-pin EPROM, EEPROM and FLASH devices (3.3V/5V) from major semiconductor manufacturers.
Up to 8 devices can be copied from a master device or programmed from a file using the included WinLink PC software. WinLink allows remote
control of all functions as well as providing a
hex/ascii editor and Job Setup Wizard.
The Gangpro-16xp programmer firmware can be upgraded in the field using WinLink. We provide
the upgrades free online.
WinLink runs under Win9x/ME/2K/XP/NT. Now also available
command line interface for integration with other software tools such as
Labview, or any user written front end.
|
|
Specification:
16XP/32XP
- Size 14" x
29" x 2.5" and 22" x 29"x 2.5"
- Weight: 14
Ib and 29Ib
- Power :
12VDC 2 Amp, External Source
- Humidity & Temp: 80%,
72 F
- Enclosure:
18 gauge steel, gray powder-coat
- Interface:
Serial RS-232
- OS: DOS, MS
Windows 95/98/XP/2000//NT
- Indicators:
32 LED status indicators. LCD indicator for Master Bank
- Operation:
Stand-Alone on all 32 sockets, PC based or Stand-Alone on Master
Bank.
- Bank: Each
Bank consists of 8 Slave Sockets or one Master Sockets and can be
ordered as a different socket platform
- Sockets:
DIP 32/ DIP 48, PLCC 32, PLCC 44, PLCC 52 , TSOP, or any customer
requested .
- Device
Support: EPROM,EEPROM, FLASH, Serial PROM, Microcontrollers
|
New Releases:
- 16 bit EPROM ( DIP 42 or 44
Pin PLCC )
- Serial Prom 24Cxx / 17xx
Gang head dip 8 pin package
- 89C5x/87C5x 44
pin PLCC
- Intersil IM 6654 Module
- Motorola Micro controllers.
68HC711 series 68HC705 Series
|
|
Replaces the Following Programmers From Logical
Shooter Vintage, Shooter LC, Husky Vintage, Husky LC, Gangpro-8, Gangpro-8+, Gangpro-Lc, Gangpro-S,
and SII, Xpro-1, Xpro-2, Xpro-LC, Prompro-7, Prompro-8, Prompro-8x, Prompro-xp, Gangstar-32, All Digelec Models,
All Stag Models, All Bytek models, Direct Data I/O*
compatibility , supports file formats from all other programmers. Approved
for Casino use, Casino Verifier Option. |
|
Available Platters of 9 Sockets, one Master and 8
Slaves
ANY NEW PLATTER CAN BE
ADDED UNDER 4 WEEKS , WITH NO ENGINEERING COST TO YOU!
|
PROG8x-32D |
DIP FOR 24/28/32 PIN MEMORY DEVICES 600 MIL |
|
PROG8x-P3228 |
PLCC PLATTER FOR 512k OR SMALLER DEVICES |
|
PROG8x-P3232 |
PLCC PLATTER FOR ONE MEG OR HIGHER DEVICES |
|
PROG8x-P51
|
44 Pin PLCC FOR 8051 TYPE MICROCONTROLLERS |
|
PROG8x-P44 |
44 Pin PLCC FOR 16 BIT MEMORY DEVICES |
|
PROG8x-D40 |
40 Pin DIP SOCKET FOR 16 BIT MEMORY DEVICE |
|
PROG8x-D51 |
40 Pin DIP SOCKET FOR
8051 TYPE DEVICES |
|
PROG8x-48D |
48 Pin DIP SOCKET FOR DIP DEVICE LARGER THAN 40
PIN |
|
PROG8x-8DS |
Serial PROM 24x , 17x series 8 Pin DIP gang head with 8 socket capcity |
| PROG8x-P711
|
52 PIN PLCC PLATTER FOR THE 68HC711 MICROS |
| PROG8X-P16ISP
|
DIP /ISP
PLATTER FOR MICROCHIP PIC MICRO-CONTROLLERS |
| PROG8X-S28-P6 |
68HC705P9 SO 28
PLATTER |
| PROG8X-P44-C8 |
68HC705C8 PLCC
44 PIN PLATTER |
|
PROG8x-48T |
TSOP FOR FLASH MEMORY DEVICES |
ccccccccombo
Option! Choose a
different Socket or Family Type for each of the four banks below. For
example: Configure unit below for a DIP-32 , PLCC-32 , PLCC 28 and
PLCC-44 ! ( note in the multi socket type configuration , you can program
one 9-socket module at a time, but this configurations gives you the
advantage of not having to change the programming heads).
Ideal Unit for the Gaming and Vending
Industry
The Gangpro-8xp/16xp/32xp is used
throughout the casinos in north America for reprogramming of slot machines,
vending machines, bill exchangers, bill validators and the unit is approved
by the gaming commission for secure use. Optional features allow Program
Lock with password security , Verifying Mode, CRC and Check-Sum checking,
and compatibility with the Kobotron systems. Custom software and hardware
can be added to customize use for each casino Optional verifier and security features
for use in casinos and secured vending applications.
|
FLASH/EEPROM TYPICAL PROGRAMMING
SPEED
----------------------------------------------------------
29F040 x 4 ERASE 2 sec
BLANK 50 sec
COPY 160 sec
COMPARE 70 sec
----------------------------------------------------------
29F010 x 4 ERASE 2 sec
BLANK 15 sec
COPY 40 sec
COMPARE 18 sec
----------------------------------------------------------
29F040 x 4 ERASE 2 sec
BLANK 50 sec
COPY 160 sec
COMPARE 70 sec
----------------------------------------------------------
29C010 x4 COPY 12 sec
COMPARE 18 sec
----------------------------------------------------------
29C040 x4 COPY 40 sec
COMPARE 70 sec
|
|
----------------------------------------------------------
EPROM
----------------------------------------------------------
27C080 x1 COPY 210 sec
COMPARE 120 sec
27C080 x8 COPY 480 sec
COMPARE 245 sec
----------------------------------------------------------
27C040 x1 COPY 115 sec
COMPARE 60
27C040 x8 COPY 260 sec
COMPARE 125 sec
----------------------------------------------------------
27C010 x1 COPY 35 sec
COMPARE 30 sec
27C010 x8 COPY 70 sec
COMPARE 65 sec
|
|
