|
Select From Products Below by Clicking
on the link
Free File Conversion Utilities Click Here
Do you have an Older Programmer you want to trade? Call us for
our generous Trade program.
You can't afford to buy a new programmer? Call us , we have a
large selection of refurbished models for a fraction of the cost!
Do you have old obsolete devices you cannot find a programmer
for? Try us! we even support chips dating back to 1977 such as the Intersil
IM6655 or IM6654 and TI TMS2708 , Etc. Waferscale PSD, Raytheon and Harris
PROMs, etc. etc.
Did you know that Logical Pioneered the field of Universal Device
programmers by introducing the first DAC-PER-PIN programmer in 1984, The Allpro
Universal Programmer?
Do you need advice on how to select a programmer? Well call us ,
since we have done it for 27 years! If we can't help you , we will
recommend a competitor!
Did you know Logical owned the most popular PLD design language
CUPL for many years and later sold the product line to Protel Internaltional
Can you get cash for your old Logical Programmer? Yes you can ,
before you auction it on Ebay, give us a call!
How Do you send a unit in for Repair.
Simply Call 303-861-8200 get, an RMA number and ship it to our
factory address in Denver at 1521 Marion St. Denver, Co, 80218
What is the fastest way to place and order? You can fax us the
order to 303 -813-9019 and call us with your credit card number
Logical acquired several companies over the years, including
Digelec , Stag USA and a fewer small programming companies. Also Logical
provides direct replacement for the now defunct Bytek programmers co. and Valley
Date sciences. Logical provides direct replacement for various Digelec and Stag
Microsystem gang programmers.

NEEDHAMS COUNTER
| |
|
Portable Hand-Held AVR Programmer with Base
 |
Cradel/HandsetKit for Hand Held Field and Production Programmer for 128K AVR devices. Includes one programmer.
Load the programmer from a PC using this starter kit and the simple
Wizard Software and then you do not need PC again. The Hand Held
programmer is completely portable and you just plug it into your
target boards and program/verify Flash and/or EEPROM with a single
button press.
|
|
Software Features
- supports Windows 95/98/2000/NT/ME/XP
- simple Wizard software
- easy file selection for Flash and EEPROM
- select program Flash only or EEPROM only or program both
- most file formats can be loaded
- clear Fuse and lockbit setting screen, including new extended
Fuse options
- select target Voltage, from 0-5V with 0.02V resolution
- click finish to load your programmer
|
|
|
|
Kit
contents
- Hand Held Programmer with 128K code space
- PC Interface (parallel port, LPT1)
- Programmer adapter for loading code and settings
- Ribbon cables with 10-way connector
- Software CD
- Supplied in case
|
|
Programmer Features
- Hand-held programmer uses 9V PP3 battery or power supply
- Single button operation
- Load it once, program targets for ever
- Reload new programs as often as you need
- Holds program code indefinitely
- Supports all Fuse and Lock bits
- Program/Verify Flash or EEPROM or both
- Supports programming from 2.7 - 5.5V, depending on target Vcc
- Can power target device (up to 150mA) or can draw power from
target
- Dimensions: Metric- 106mm x 58mm x 25mm
- Dimensions: Imperial - 4.5 x 2.5 x 1 inches
- 128KB code space
Device Support
Supports all Low Voltage (L) Devices as well
- ATtiny26
- AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S2333,
AT90S4433, AT90S4414, AT90S8535, AT90S8515
- ATmega8, ATmega8515, ATmega8535, ATmega16, ATmega161,
ATmega162, ATmega163, ATmega169, ATmega32, ATmega64
- ATmega103, ATmega128, ATmega128L - all 128K
A of the programmer is available
|
|