|
Select From Products Below by Clicking
on the link
Free File Conversion Utilities Click Here
Do you have an Older Programmer you want to trade? Call us for
our generous Trade program.
You can't afford to buy a new programmer? Call us , we have a
large selection of refurbished models for a fraction of the cost!
Do you have old obsolete devices you cannot find a programmer
for? Try us! we even support chips dating back to 1977 such as the Intersil
IM6655 or IM6654 and TI TMS2708 , Etc. Waferscale PSD, Raytheon and Harris
PROMs, etc. etc.
Did you know that Logical Pioneered the field of Universal Device
programmers by introducing the first DAC-PER-PIN programmer in 1984, The Allpro
Universal Programmer?
Do you need advice on how to select a programmer? Well call us ,
since we have done it for 27 years! If we can't help you , we will
recommend a competitor!
Did you know Logical owned the most popular PLD design language
CUPL for many years and later sold the product line to Protel Internaltional
Can you get cash for your old Logical Programmer? Yes you can ,
before you auction it on Ebay, give us a call!
How Do you send a unit in for Repair.
Simply Call 303-861-8200 get, an RMA number and ship it to our
factory address in Denver at 1521 Marion St. Denver, Co, 80218
What is the fastest way to place and order? You can fax us the
order to 303 -813-9019 and call us with your credit card number
Logical acquired several companies over the years, including
Digelec , Stag USA and a fewer small programming companies. Also Logical
provides direct replacement for the now defunct Bytek programmers co. and Valley
Date sciences. Logical provides direct replacement for various Digelec and Stag
Microsystem gang programmers.
NEEDHAMS COUNTER
| |
|
ChipMaster 6000XP
Intelligent 48 Pin Universal
Programmer
|
THE MOST POPULAR UNIVERSAL
PROGRAMMER ON THE MARKET! OVER 30,000 UNITS SOLD TO-DATE!
|
|
|
|
You can now upgrade the Chipmaster
6000 to 6000xp,
click here to learn
more |
|
Features
of Chipmaster 6000xp , Our Top of the Line Universal Programmer With The
Most Device Support of any Machine on The Market Today:
Printer-port interface with auto-switch power
Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter.
Less then 2 seconds per M bit Programming speed for high density flash chip.
No adapter required for DIL chip up to 48-pin
48-pin universal pin driver and current limit.
Auto-sense/ Self programming with statistical report
Device insertion /continuity check
Universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP
Supports Windows 95/98, Windows 2000, windows XP and NT
Automatic EPROM/ Flash ID search
Serialization for Memory/μP chip
Memory buffer H/L byte swap
Project file save / load function
User-selectable verify Vcc with one or two-pass verify voltage
Automatic file format detection and conversion
User-changeable programming parameters
Pin swapping table provided for all adapters
Software update via web
|
| |
Universal pin driver--No adapter required for DIL devices
The
Chipmaster 6000XP
features universal pin driver, each pin can supply four different
voltage, ground, it also can be configurable as TTL high/low levels
with pull-high/pull-low, high-speed clock and high impedan
ce. This
advanced pin design lets you program any DIL device of up to 48 pins
without needing an adapter.
|
| |
Unbeatable programming speed
The
Chipmaster 6000XP's on-board intelligence reduces system
overhead to a minimum. The Chipmaster 6000XP
has 100% more performance then its predecessor product in
program the high density flash chip, it can program a Intel 32 M bit
flash chip in less then 60 seconds. |
|
|
Device insertion
and contact checks--No mistakes!
The
Chipmaster 6000XP performs device insertion and contact
checks before it programs each device. It can detect poor pin
contact and devices inserted upside down or in the wrong position.
This function protects your pocketbook by preventing expensive chip
damage due to operator error. |
|
|
EPROM and Flash memory ID detection and Search
Many EPROM and Flash
memories have a build-in device ID and manufacturer ID. The
Chipmaster 6000XP can read the device's ID
by press hot key to detect the ID and compare its database and
determined the chip’s correct vendor and product number. This
feature is especially useful with secondhand chips and devices that
have had their part number accidentally (or intentionally) removed
(this function only applied to 28 pin or 32 pin EPROM and Flash).
|
|
|
Auto-sensing and
self-programming
To meet mass-production
requirements the Chipmaster 6000XP has
implemented new patented technology in both its hardware and
software. After entering the Mass-production Mode, the production
line operator inserts a device into the ZIF socket. An LED on the
Chipmaster 6000XP indicates the device is
ready and the operator simply removes it and replaces it with a new
one. No formal training is necessary adding flexibility and saving
time and money. In addition, the Chipmaster 6000XP's auto-sensing
feature ensures the device has been inserted correctly and then
automatically programs the device. Furthermore, in the
mass-production mode the system keyboard is automatically disabled
preventing the operator from making any inadvertent mistakes.
|
|
|
Project file save
and load
User can create and save
a project file which contains device selection, buffer data and all
the programming set-up options, this project file can be called upon
at any time for future use without having to go through the setting
up procedure again, your design file can easily pass to production
department without making any mistake.
|
|
|
Serialization
function
If your memory devices
need individual serial numbers with different increment sequence and
initial value, the Chipmaster 6000XP has
an Auto Increment function. This simply increments the serial
numbers in the buffer each time a new device is inserted. This saves
time and money. |
|
|
User-selectable
verify voltage, one or two-pass verification
The
Chipmaster 6000XP lets you select the verify voltage after
you have programmed the device, e.g., Vcc, Vcc ±5%, Vcc ±10%. The
Vcc voltage can be 2.0V to 6.5V. This feature ensures that your
device has been programmed properly, preventing failures due to
programming errors and ensuring data retention.
|
|
|
Non-DIL device
support through versatile converters
The
Chipmaster 6000XP's universal pin driver capability lets it
program all 48-pin DIL devices, including all single-chip
Micro-controllers, without DIL-to-DIL adapters. However there are
many different packages beside DIL package, such as PLCC, SOP, TSOP,
QFP and SDIP. We have developed over 100 different adapters to
support these special-package devices. |
|
|
Software update via web
The
Chipmaster 6000XP has additional safety features such as a
built-in current limit and pin continuity check function. This
prevents damage from faulty chips during the programming cycle.
Free software updates are also
available via web at
www.logicaldevices.com. |
|
|
Universal 44-pin
PLCC, QFP, PSOP and TQFP adapter supports 44-pin chips
The universal pin driver
on the Chipmaster 6000XP enables you to
support all 44-pin chips such as EPLD, EPROM, Flash, EPLD and
Micro-controllers. You need only one 44-pin universal adapter which
eliminates the need to buy multiple adapters and saves money.
Moreover, different package devices within 48 pins will only require
one adapter. |
|
|
Low voltage chip
support
The
Chipmaster 6000XP support 2.0V ~ 5.0V logic level
input/output, and it can supply 2.0V~21V analog voltage (such as VCC).
Support lower then 2.7V low voltage chip such as 1.8V also possible
by special low voltage adapter on top of its 48 pin ZIF socket.
|
|
|
|
Specifications |
|
|
Socket and pin
driver
48-pin DIL/ ZIF socket with receptacle for 8-pin to 48-pin 300/ 600-mil devices.
Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution.
Software controllable rises time and current limit protection.
Logic driver supports pull-up/ pull-down or high impedance on all
48 pins with 2.0V-5V level.
Device support
Memory : PROM, EPROM, EEPROM, Flash, Serial PROM, NVRAM
Logic: PAL, GAL, CEPAL, PEEL, CDLD, EPLD,
Others: OTP/Flash Micro-controllers |
|
|
Device operations
Read, blank check, device insertion/
contact check, verify, checksum, EPROM ID check, compare, erase
chip, function test, program, memory protect, device configuration
setting, device search, edit buffer, mass production mode, modify
vector, serialization, H/L byte buffer swap, buffer search. |
|
|
PLD vector tester
Accepts JEDEC test vectors up to 48 pins
2500V/usec. rise time
File format conversion
JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S, HP
64000ABS, Straight Hex and TEKTRONIC Hex, Automatic detection and
conversion. |
|
|
PC system
requirements
Operating system: Windows 95/98, Win 2000, Windows XP or Windows NT
Processor: 386 and above
8 MB RAM minimum, 32 MB recommended
Hard disk with 16 MB free space
Parallel port with EPP mode
CD ROM driver |
|
|
General
Power: 100 to 240 VAC, auto-switching
Frequent range : 47 to 63 Hz
Power consumption : 25 W
Operating temperature: 5 to 45° (41 to 113°)
CE & LVD certified
Weight 1.8KG |
|
Pricing
Chipmaster 6000xp
Deluxe
Package; $1795.00 Order
Code: PROC6X-DX3 with 6000 trade $call
- Chipmaster 6000xp
- 3 Year Warranty
- 44 Pin Universal PLCC Adaptor or any other
PLCC socket of choice
- Unlimited Free product-lifetime software
updates
Standard Package: $1495.00 Order
Code: PROC6X-S01 with 6000 trade $call
- Chipmaster 6000xp
- One Year Warranty
- Unlimited Free product-lifetime software
updates
Basic
Package; $1295.00
Order Code: PROC6X-B01
with 6000 trade $call
- Chipmaster 6000xp
- One Year Warranty
- One Year Free Software Updates
ALLPRO-44XP add $500 to above prices.
|
|
Upgrade your Allpro-LC to
ALLPRO-44XP
(Allpro-44xp is a special version of
Chipmaster 6000xp with same device libraries)
|
 |
|
