|
Select From Products Below by Clicking
on the link
Free File Conversion Utilities Click Here
Do you have an Older Programmer you want to trade? Call us for
our generous Trade program.
You can't afford to buy a new programmer? Call us , we have a
large selection of refurbished models for a fraction of the cost!
Do you have old obsolete devices you cannot find a programmer
for? Try us! we even support chips dating back to 1977 such as the Intersil
IM6655 or IM6654 and TI TMS2708 , Etc. Waferscale PSD, Raytheon and Harris
PROMs, etc. etc.
Did you know that Logical Pioneered the field of Universal Device
programmers by introducing the first DAC-PER-PIN programmer in 1984, The Allpro
Universal Programmer?
Do you need advice on how to select a programmer? Well call us ,
since we have done it for 27 years! If we can't help you , we will
recommend a competitor!
Did you know Logical owned the most popular PLD design language
CUPL for many years and later sold the product line to Protel Internaltional
Can you get cash for your old Logical Programmer? Yes you can ,
before you auction it on Ebay, give us a call!
How Do you send a unit in for Repair.
Simply Call 303-861-8200 get, an RMA number and ship it to our
factory address in Denver at 1521 Marion St. Denver, Co, 80218
What is the fastest way to place and order? You can fax us the
order to 303 -813-9019 and call us with your credit card number
Logical acquired several companies over the years, including
Digelec , Stag USA and a fewer small programming companies. Also Logical
provides direct replacement for the now defunct Bytek programmers co. and Valley
Date sciences. Logical provides direct replacement for various Digelec and Stag
Microsystem gang programmers.
NEEDHAMS COUNTER
| |
.
low Cost In-System-Programmer for ATMEL AVR devices
such as the ATMEGA 16 , ATmega 32 etc. Very compact portable with USB interface.
You can now carry this portable programmer to your
production floor and Zap each product with the desired code directly on your
target system, without removing your flash devices from your board* or moving
your production boards to a programming station . You can buy multiple hand held
units that work with the starter kit base for your entire company. The product
will free your engineers from developing cumbersome programming algorithm for
in-system-programming. This product replaces our previous Keyfob programmers.
| 128K AVR Hand Held Programmer Starter Kit |
Order Code:PROUSB-FOB
|
Price: $259.00
|
|
 |
|
Starter kit for 128K AVR Hand Held Programmer
Starter Kit for Hand Held Field and Production Programmer for 128K
AVR devices. Includes one programmer.
Load the programmer from a PC using this starter kit and the simple
Wizard Software and then you do not need PC again. The Hand Held
programmer is completely portable and you just plug it into your
target boards and program/verify Flash and/or EEPROM with a single
button press.
Software Features
- supports Windows 95/98/2000/NT/ME/XP
- simple Wizard software
- easy file selection for Flash and EEPROM
- select program Flash only or EEPROM only or program both
- most file formats can be loaded
- clear Fuse and lockbit setting screen, including new extended
Fuse options
- select target Voltage, from 0-5V with 0.02V resolution
- click finish to load your programmer
Starter Kit contents
Hand Held Programmer with 128K code space
PC Interface (parallel port, LPT1)
Programmer adapter for loading code and settings
Ribbon cables with 10-way connector
Software CD
Supplied in case
Programmer Features
- Hand-held programmer uses 9V PP3 battery or power supply
- Single button operation
- Load it once, program targets for ever
- Reload new programs as often as you need
- Holds program code indefinitely
- Supports all Fuse and Lock bits
- Program/Verify Flash or EEPROM or both
- Supports programming from 2.7 - 5.5V, depending on target Vcc
- Can power target device (up to 150mA) or can draw power from
target
- Dimensions: Metric- 106mm x 58mm x 25mm
- Dimensions: Imperial - 4.5 x 2.5 x 1 inches
- 128KB code space
Device Support
Supports all Low Voltage (L) Devices as well
- ATtiny26
- AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S2333,
AT90S4433, AT90S4414, AT90S8535, AT90S8515
- ATmega8, ATmega8515, ATmega8535, ATmega16, ATmega161,
ATmega162, ATmega163, ATmega169, ATmega32, ATmega64
- ATmega103, ATmega128, ATmega128L - all 128K
A of the programmer is available
You
only need one starter kit for as many programmers as you require
If you do not want to use the internal 9V PP3 battery, the power
supply required is 9V with a 2.5mm Barrel connector. These are
available on the shop.
Power
Supply Unit
|
|
|
AVR USB ISP PROGRAMMER
World Smallest Programmer to perform In-system Programming
for engineering and limited production of Atmel Flash Devices. Other version
available for ST, Naional Cops, and Microchip PIC micros.,
| AVR USB ISP |
Order Code:
PROUSB-AVR
|
Price: $249.00
|
|
 |
|
|
AVR USB Programmer
AVR In System Programmer (ISP) for the USB port on the PC. Packed
with extra features.
Main Features
- Programmer powered by USB bus
- Conforms to USB power requirements, including sleep
- Supports USB v1.1 protocol and USB v2.0 compatible
- Direct USB drivers not Virtual Serial Port
- Supports Win 98SE/2000/XP/ME
** Win 95 and early Win98 should work with Microsoft USB update
** NT4 is NOT supported, as Microsoft have not updated kernal
support and no driver support is available
- Programs target devices from 1.8V to 5V
- Multiple programmers from one PC
- Uses standard 10-way target interface
- Automatic program start on insertion
Software Features
- Simple install and detection of each programmer
- Multiple programmers can be operated from a single PC screen
or multiple screens
- Full Fuse and Lockbit support on user friendly screen
- Colour coded Flash and EEPROM buffers can be edited in Hex and
ASCII
- User defined serial numbering in Flash or EEPROM
- Comprehensive Check Sum support CR16/32, XOR 16/32
- Flexible Auto-program options
- Pop-up Reset on Error feature prevents errors being ignored -
can be disabled
- Plug and Program mode - programmer starts automatically when
new target is detected, if this mode is set
- Full verify or only Verify pages with data for extra speed
Contents
- Programmer unit - 66 x 66 x 28mm (2.6 x 2.6 x 1.1 inches)
- 1.8m USB A (PC or Hub) to USB B (Programmer) cable
- 1m programming lead with 10-way target interface
- Software CD
- Supplied in video case
Device Support
- ATtiny12
- ATtiny15
- ATtiny22
- ATtiny26
- AT90S1200/A
- AT90S2313
- AT90S/LS2323
- AT90S/LS2343
- AT90S/LS2333
- AT90S4414
- AT90S/LS4433
- AT90S/LS4434
- AT90S8515
- AT90S/LS8535
- ATmega103
- ATmega161
- ATmega163
- ATmega8
- ATmega8515
- ATmega8535
- ATmega16
- ATmega32
- ATmega323
- ATmega64
- ATmega128
- ATmega162
- ATmega169
- All Low voltage (L) versions are supported
- Now Available
- ATmega169
- ATtiny26
- ATmega162
- Coming Soon
- ATtiny13
- ATtiny2313
|
|
|
CALL US NOW FOR ORDERING :
1-303-861-8200
FAX YOUR ORDERS DIRECTLY TO LOGICAL DEVICES
INC. 303 813-9019
|
