Denver /  Broomfield  Colorado, USA   

 TEL : 303-861-8200  FAX:303 813-9019        Email:  support@logicaldevices.com      

 USB PIC MICRO PROGRAMMER  WITH  IN-SYSTEM-PROGRAMMING ABILITY

PRESTO PICmicro USB port programmer Very fast programmer, self powered from USB bus with enhanced ICSP programming capability.

       Features

• Many devices supported
• Very fast operation
• Controlled and powered by USB
• Target application voltage 3 to 5 V
• Overcurrent and overvoltage protection
• GO button

• PRESTO is optimized for speed and it is really very fast, for example the full PIC18F8720 is programmed and verified in 6 seconds! (3 seconds for programming and 3 seconds for verification). Complete eCOG1 in less than 3 seconds.
• In-Circuit Serial Programming (ICSP) is a very useful and often used PIC feature. PRESTO directly supports this function using a dedicated connector and an included cable. In comparison to other ASIX' programmers, the ICSP connector is enhanced - there are two more pins allowing support of wider range of components.
• The target application device can be either powered by PRESTO (5 V nominally) or can be powered by an application within a voltage range 3 to 5 V (with 10% tolerance).
• GO button allows user to start device programming comfortably, without need of PC keyboard or mouse. LEDs indicate programmer status - green LED ON-LINE informs about USB connection and yellow LED ACTIVE indicates that PRESTO is just working (programming, reading, ...)
• Overcurrent limitation of target supply and programming voltages remarkably reduces the risk of damaging the parts because of user mistakes. Target supply overvoltage detection is also implemented.
• PRESTO is powered from the USB bus, so there is no need for any additional supply adaptor.
• PRESTO is small, lightweight and compact.
• The software upgrade is freely available for all users on the Internet. It contains new device support, new functions and algorithm updates when required.